For RV’s, Boats And Other Plastics

NEW! FASTER ACTING FORMULA!          PRESTO! Gelcoat Rejuvenator™ (GCR™)

4 oz. (120ml) PRESTO! GCR™

4 oz. (120ml) PRESTO! GCR™

Links to our secure on-line store to 
PURCHASE A 2 oz. Bottle of GCR™ (Coverage: 200 Sq. Ft.)
PURCHASE A 4 oz. Bottle of GCR™ (Coverage: 400 Sq. Ft.)
ON-LINE STORE
CURRENT SPECIALS
PRESTO! Gelcoat Rejuvenator™ on faded red gelcoat.

PRESTO! Gelcoat Rejuvenator™ on faded red gelcoat.

Video Demo of PRESTO! GCR™: 
PRESTO! Gelcoat Rejuvenator™ Gelcoat and Plastic Rejuvenator

Customer Video Review:
Faded Boat Dash Product Review

 

 

PRESTO!™ The Original Wipe-On Clearcoat™

WHAT IS THIS PRODUCT?

PRESTO! CGR™ is based on PRESTO! PRO™. PRESTO! CGR™ is specially modified to work on plastics beyond just automotive paints. In addition to all of the properties of PRO™, CGR™ is designed to stop fiberglass and gelcoat oxidation (that annoying white residue) as well as work on almost ALL other plastics. While we originally stood behind GCR™ for 5 years, our customers are  reporting this is more a permanent solution to the oxidation and other plastic fading problems.

Sailfish Before & After one quick and easy coat of PRESTO! GCR™

Sailfish Before & After one quick and easy coat of PRESTO! GCR™

If you haven’t read about PRO™, the Original Wipe-On Clear Coat™, here’s information that also applies to GCR™…

PRESTO! PRO™ was originally developed for GM, Ford and Chrysler as a 100% solids coating. 100% solids is a trade term that means this product contains no solvents, no water, no alcohol or anything else that can evaporate to pollute the atmosphere or doesn’t become part of the solid paint film. Eliminating the solvents eliminates all the diseases (from cancer to liver damage), the fire hazard and over 1 billion metric tons of air pollution caused by these paints. PRESTO!™ easily surpassed and still surpasses ALL automotive performance specifications for car paints with none of the hazards of those paints.

One Happy customer after using PRESTO! Gelcoat Rejuvenator™

One Happy customer after using PRESTO! Gelcoat Rejuvenator™

As a result, this is the most advanced, highest performing, longest lasting and environmentally, friendly wipe on product available anywhere. Additionally, PRESTO!™ provides the most comprehensive chemical, physical and UV protection on the market and is the ONLY product of this type that has had any of its claims verified by any independent testing laboratory.

As plastic surfaces weather, additives in the plastic or paint are washed out which create microscopic pores. As a result, the surface looks white or faded to our eyes. PRESTO!™ penetrates, fills & seals these pores restoring surface color & fighting future damage.

Customer's Trailer.

Customer’s Trailer.

Unlike other products, PRESTO!™ is so durable it lasts for years – not weeks, nor can you wash it away – ever. PRESTO!™will not wash away like wax, silicone or oil based products. PRESTO!™ penetrates and integrates into the surface so effectively, as little as one coat can restore the showroom-like appearance of your vehicle and will never flake off.

PRESTO!™ was developed & tested over 15 years before the first bottle was ever sold. Other car care products use the same old, conventional chemicals which is why they pretty much all do the same thing and last the same. We pioneered the use of new and unique, higher performing chemistry, using raw material never used for this purpose before, or since by any manufacturer anywhere. This is why NO other product can outlast or out perform PRESTO!™.

WHAT RESULTS CAN I EXPECT? The way the surface looks like when it’s wet is what this product will make the surface look permanently.

PURCHASE A 2 oz. Bottle of GCR™ 
PURCHASE A 4 oz. Bottle of GCR™

PRESTO! GCR™ IS USED TO: 

  • Ideal for BOATS, RV’s, SPORTS EQUIPMENT
  • Recondition and protect RV caps, Sides and Tops
  • Recondition automotive cladding
  • Designed for use on fiberglass and gelcoat to stabilize and prevent oxidation
  • Revive/recondition most faded outdoor plastics including decals, boot stripes and anti-slip areas
  • Revive/recondition powder coated parts and instrument trim
  • Revive/recondition Carbon fiber hoods, parts and panels (may require 2+ appliactions)
  • Revive/recondition faded automotive plastic trim, bumpers, running boards
  • Seal, stabilize and protect exposed color coat due to missing automotive clear coat
  • Fill and seal Minor Scratches & Scuffs onAutomotive Clear Coats
  • Eliminate those “spider web” scratches from car washes with one simple wipe-on coat
  • Impart scratch and scuff resistance up to 3 to 4 times greater than normal clear paints
  • Impart protective properties against:

+ Black Aluminum Cleat Stains

How GCR™ penetrates, seals and stabilizes against future oxidation.

How GCR™ penetrates, seals and stabilizes against future oxidation.

+ Fuel Damage (Racing and regular marine fuel)

+ Acid rain

+ Bird droppings

+Spider Droppings

+ Insect Damage

+ Concentrated Hydrochloric Acid

+ Concentrated Nitric Acid

+ Concentrated Sulfuric Acid

+ UV Light

Cure time:     As fast as 1 hour in full sunlight at 80F. Overcast conditions and colder temperatures extend cure time.

Temperature:     Apply at temperatures above 55F just because it takes longer to self-level at cooler temperatures.

Coverage:     100 Sq. Ft. per US. Fl. Oz. GENERALLY (99% of the time) one coat is enough. Typically, a 2US. Fl. Oz. Bottle will cover up to TWO small to medium sized cars – bumper to bumper. Apply this product before 10 am, this gives you the prime UV cure time of the day for curing. 10:30 – 3pm is prime sunburn time of the day because that’s when UV levels are the highest. Do NOT apply the night before as this product will be completely absorbed into the surface.

This is what a Splotchy or "starved" application looks like. Not enough product was used to make the surface look uniform.Simply apply a LITTLE bit more to make it look even and NOT greasy.

This is what a Splotchy or “starved” application looks like. Not enough product was used to make the surface look uniform.Simply apply a LITTLE bit more to make it look even and NOT greasy.

How To Apply This Product:     This product goes on the same way other wipe on products are applied, only you don’t need protective gloves. Use a CHEAP paper towel to apply. Expensive paper towels absorb and keep the product in the paper towel where it doesn’t do you any good. NEVER pour or apply the product directly onto the target surface because it will harden too fast on youIf you do get into trouble, call customer support for help.

Typically, it should take a few seconds to do a square foot of area. Apply until the area looks uniform and even. If the surface looks “splotchy” the surface absorbed most of the product and needs more product to look uniform. Applying too much, the surface looks “greasy” and will cause cure to take longer. Redistribute product over the surface until it looks uniform.

Arrows indicate “starved” splotches that need more GCR™

After application, lightly brush your fingers over the surface. If your fingers look, wet then there’s too much               product on the surface. Simply spread out the product or wipe off the excess. Lightly wipe away any streaks caused by your fingers.

DO NOT rub hard because paper towels can scratch the surface if too much pressure is applied. As the product starts to harden the towel, wrap a new towel around the old paper towel. Dispose of used paper towels as non-hazardous solid waste as needed.

PRESTO! GCR™ on white gelcoat. Note the uniform appearance of the product on the left, "after" side of the panel.

PRESTO! GCR™ on white gelcoat. Note the uniform appearance of the product on the right, “after” side of the panel.

PRESTO! GCR™ on Red gelcoat. It works on any color! Note the uniform appearance of the product on the "after" side of the panel.

PRESTO! GCR™ on Red gelcoat. It works on any color! Note the uniform appearance of the product on the “after” side of the panel.

Don’t remove the foil seal, just puncture it with a pencil or pen tip. This keeps hardened product from falling  into the bottle when you use it. This also avoids accidentally losing all of the product if the bottle gets knocked over and keeps the UV from getting into the bottle and solidifying the contents!

Surface Prep:      For best coverage and highest gloss results, oxidation should be compounded off by using a wax-free compound. The higher the surface gloss is before application, the higher the final, permanent gloss will be.

 

 

If You Need Help:     Customer service is always available to help you out. Give the PRESTO!™retailer where you purchased our product for help. See our “contact us” page for all current contact information.


TESTIMONIALS

“I recently used the gelcoat rejuvenator on my faded 20 foot boat and I simply cannot believe the results.  I only wish I had found this product before I spent an entire weekend compounding and waxing the other side with poor results.  You should consider me to be your “new” salesmen in New York.  I am going to be telling everyone at my marina about this awesome product! It’s a life saver!  I have enclosed some photos of my boat.”

–Mike I., Terrace NY


“Just got back from camp and I have to tell you I just can not sing enough praises for your product! Unbelievable! My boat is a 1988 Crestliner IO with bright red upper half and white lower. The red was actually grey from oxidation after all these years. With just one application of Presto the difference was phenomenal! It was magic! And the amount of product needed is exactly what you advertise. A little bit goes a long way. I will be adding a second coat soon but just wanted to thank you for discovering this product. Nothing could be easier to use.

-Steve B., Albany, New York


NOTE: This product is a high gloss and colorless clear coat and cannot replace or repair missing or damaged color.

LINKS TO OUR SECURE:
PURCHASE A 2 oz. Bottle of GCR™
PURCHASE A 4 oz. Bottle of GCR™
ON-LINE STORE 
CURRENT SPECIALS

Archives